Model number: RMKS-DAL4-SZ
The PowPak Single Zone Control Module with DALI® is a radio frequency (RF) control that operates 1–4 DALI® LED drivers or fluorescent ballasts based on input from Pico remote controls and Radio Powr Savr sensors. The control module is ideal for small areas (e.g., classrooms, conference rooms, private offices). Communication with RF input devices (e.g., Pico remote controls, Radio Powr Savr sensors) is accomplished by using Lutron Clear Connect RF technology. These products are also compatible with the Vive hub which enables a simple setup process using the free Lutron Vive app (available for download from the App Store or Google Play online marketplace) or by using web-based software with any Wi-FiR enabled iOSR or AndroidR compatible device. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time. System reprogramming will be required.
Features
• Controls 1–4 DALI® fixtures in a single zone
• Configurable high- and low-end trim.
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy vacancy sensors, and 1 Radio Powr Savr daylight sensor.
• Utilizes Lutron Clear Connect RF technology; refer to model number chart below for frequency band data.
• Mounts through a 20 mm knockout.
Specifications
Regulatory Approvals
• CE
• IEC 60669-2-5
• DALI-2® Certified
Power
• 220 –240 V~ 50 / 60 Hz, max. current 50 mA
Other Power Specifications
• Standby power: 220–240 V~ <0.5 W
System Communication
• Operates using Clear Connect RF technology for reliable wireless communication.
• Wireless sensors and controls must be located within 9 m of the associated control module.
Mounting
• This device can be installed on a fixture / troffer, junction box, or marshalling box using the conduit nut or with mounting screws. The device must NOT be mounted inside a fixture / troffer or other metallic enclosure.
• Refer to the installation instructions and consult local and national electric codes for proper installation.
• The PowPak Control Module needs to be accessible for some programming steps. Record where it is mounted so that it can be easily located later.
Metal Ceiling Mounting
• Metal ceiling grids must have a > 3 mm gap of nonmetal material which extends the entire length of the tile on at least one edge. This is often achieved by foam spacers that are used to prevent tile-to-tile rattling.
• Metal ceiling grids which are continuous (with no gap) or those that are interlocked, must have a total surface area that is less than 81 m2 for each section. The overall space can be larger as long as there are non-metal sections bordering or intersecting the metal sections.
Environment
• Ambient operating temperature: 0 °C to 40 °C
• 0% to 90% humidity, non-condensing.
• For indoor use only.
• All drivers and ballasts used with Vive wireless controls must comply with EN 55015 / CISPR 15.
Key Design Features
• LED status indicator shows load status and provides programming feedback.
• Configurable high-end and low-end trim.
• Power failure memory: If power is interrupted, connected loads will return to the previous level prior to interruption.
Downloads
Vive Application Guide
Vive Design Guide
Lutron Vive Touchless Solutions
PowPak Single Zone Control Module with DALI
Videos