This POWERdrive product will be configured to your required currents at any interval between 150mA and 1400mA. Please state your required current in the boxes above.
If you do not require this extra service & wish to purchase this product at the pre-configured current of 350mA please click here.
By using the new POWERdrive product you will experience the easiest way of integration of a DMX LED driver into your RGBW LED luminaire. If you're designing your next generation RGBW wall washer or downlight, and don't have any electronics experience or knowledge in the company, the POWERdrive product will be the solution. It's ready to go with industry standard push-in connectors for installation, global certification programs supported on safety and performance, and supporting a wide operating window for the LED selection of your choice.
Benefits
- Quality of Light performance in any DMX application
- Optical isolation in the DMX interface improves the robustness against incorrect wiring and mishandling. The isolation also improves the immunity of the driver, and the connected DMX network, against surge events during, i.e. lightning strikes
- Short lead times; with delivery in just days
- Start-up time meets CA Title 24 requirements; A startup time of < 500ms
Input Characteristics
Nominal input voltage range AC: 120 - 250V (ENEC), 120 - 277V (UL)
Absolute input voltage range AC: 108-305V
Nominal input voltage range DC: 120 - 275V
Maximum input current: 0.5A @ 120V / 0.26A @ 230V / 0.22A @ 277V
Input frequency range: 50 - 60Hz
Output Characteristics
Maximum LED output power: 50W
Number of LED outputs: 4 (UL Class 2)
Programmable LED output current range: 150 - 1400mA per LED output. The cumulative current across all LED outputs shall not exceed 3400mA at any point in time during normal operation
LED output type: programmable in 1mA steps via DMX terminal and FluxTool
LED output current tolerance: +/- 5% at programmed LED output current
LED output voltage range: 2 - 55V