Model number: RMKS-16R-DV-B
The PowPak Relay Module with Softswitch is a radio-frequency(RF) device that uses Lutron patented Softswitch technology to control general-purpose loads based on input from Pico remote controls and Radio Powr Savr occupancy and daylight sensors.Communication with RF input devices,such as Pico remotecontrols and Radio Powr Savr sensors, is accomplished using Lutron Clear Connect RF Technology.
These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time. System reprogramming will be required.
Features
• Softswitch: Lutron patented technology prevents arcing of relay contacts, extending product lifetime
• Various operating voltages available—refer to model number chart on next page for details on voltage requirements
• Capable of switching general-purpose loads
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Utilizes Lutron Clear Connect RF Technology—refer to model number chart below for frequency band data
• Mounts to a 100 mm x 100 mm square junction box through a 20 mm knockout
Specifications
Regulatory Approvals
• CE (European Union)
Power
• Operating voltage: 220–240 V~ 50/60 Hz
• Standby Power Consumption < 1.0 W
System Communication
• Operates using Clear Connect RF Technology for reliable wireless communication; refer to model number chart on page 1 for band frequency details
• Wireless sensors and controls must be located within 9 m of the associated control module.
Metal Ceiling Tile Mounting
• Metal ceiling tile grids must have a > 3 mm gap of non-metallic material which extends the entire length of the tile on at least one edge. This is often achieved by foam spacers that are used to prevent tile-to-tile rattling.
• Metal ceiling tile grids which are continuous (with no gap) or those that are interlocked, must have a total surface area that is less than 81 m2 for each section. The overall space can be larger as long as there are non-metallic sections bordering or intersecting the metal sections.
Environment
• Ambient operating temperature: 0 °C to 55 °C
• 0% to 90% humidity, non-condensing
• For indoor use only
• All drivers and ballasts used with Vive wireless controls must comply with EN 55015 / CISPR 15
Output Ratings
• -16R models: 16 A
RMKS-16R models: No minimum load requirements.
• Load types include (but are not limited to): Incandescent, MLV, ELV, Resistive, Inductive, Magnetic fluorescent, Electronic fluorescent
Motor rating
RMKS-16R- models: 6 A 220 –240 V~
Softswitch
• Patented Softswitch circuit eliminates relay arcing at mechanical contacts
• Extends relay life to an average of 1 million cycles
• Output is non-latching
Key Design Features
• LED status indicator shows current load status and provides programming feedback
• Power failure memory: If power is interrupted, connected loads will return to the previous level prior to interruption
Downloads
Vive Application Guide
Vive Design Guide
Lutron Vive Touchless Solutions
PowPak relay module with softswitch
Videos