Model number: RMKS-CCO1-24-B
The PowPak CCO Module is a low-voltage radio frequency (RF) control that provides a single dry contact closure output based on input from Pico remote controls and Radio Powr Savr occupancy and daylight sensors. It can be powered by to 24 V~ or 24 V- for easy connection and integration into building management, HVAC, VAV, and other third-party systems. Communication with RF input devices, such as Pico remote controls and Radio Powr Savr sensors, is accomplished using Lutron Clear Connect RF Technology.
These products are also compatible with the Vive hubwhich enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time.
System reprogramming will be required. For a complete list of features supported with the Vive hub, see specification submittal 3691044.
Note for Replacement: RMKS - the “S” model can replace the non-”S” model.
Features
• Single contact closure output including both normally open (NO) and normally closed (NC) dry contacts
• Maintained output type
• Operates at 24 V~ or 24 V-
• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
• Utilizes Lutron Clear Connect RF Technology – refer to model number chart below for frequency band data
• Screw tabs provided for surface mounting (recommended); or mounts to a 100 mm x 100 mm square junction box through a 20 mm knockout
Specifications
Regulatory Approvals
• CE (European Union)
Power
• IEC SELV / PELV
• Operating voltage: 24 V~ / 24 V-
• Operating current, nominal: 45 mA (24 V~) 35 mA (24 V-)
• Standby Power Consumption: < 1.0 W
System Communication
• Operates using Clear Connect RF Technology for reliable wireless communication; refer to model number chart on page 1 for frequency band details
• Wireless sensors and controls must be located within 9 m of the associated control module.
Metal Ceiling Tile Mounting
• Metal ceiling tile grids must have a > 3 mm gap of non-metallic material which extends the entire length of the tile on at least one edge. This is often achieved by foam spacers that are used to prevent tile-to-tile rattling.
• Metal ceiling tile grids which are continuous (with no gap) or those that are interlocked, must have a total surface area that is less than 81 m2 for each section. The overall space can be larger as long as there are non-metallic sections bordering or intersecting the metal sections.
Downloads
Vive Application Guide
Vive Design Guide
Lutron Vive Touchless Solutions
Vive PowPak CCO Module